A&D TM-2441, Инструкция по эксплуатации

Страница: 59 / 120

39
6.3.3. Outputting Measurement Results
The measurement data stored in the memory can be output to the
peripheral using USB data transfer.
Refer to "
8.8 Connecting the Recorder to a Dedicated Peripheral
".
Do not remove the cable while using USB communication.
It may cause damage to the data.
Note
When the battery indicator displays , data transfer cannot be
used. Replace the batteries to use data transfer.
6.3.4. ID Numbers
The factory default ID number is "0".
Configure ID numbers using
dedicated peripheral .
Note
ID numbers cannot be configured with the recorder and require use of
a dedicated peripheral .
Caution