A&D TM-2441, Инструкция по эксплуатации

Страница: 52 / 120

32
6.2.1. S-BPM Programs
Office blood pressure
OBP
When the / switch is pressed, blood pressure is measured
once and is stored in the memory.
Automated office blood pressure
AOBP
When the / switch is pressed, AOBP is started.
First, the device is idle for the interval time to allow the patient to relax.
Next, the AOBP performs a "
1 scope ".
" 1 scope " consists of a set of blood pressure measurements and
interval times, which are repeated for the number of times of the
measurement count. The last interval time is omitted.
When the / switch is pressed during the " 1 scope ", the
" 1 scope " is stopped.
T : Interval time
Press the / switch to start the measurement.
Time
Blood pressure measurement
Press the / switch to start the " 1 scope ".
Press the / switch to stop the " 1 scope ".
T T
Time
T T T
Not measured
Press the / switch to start the " 1 scope ".
T T
Time
T
T T
1 scope Blood pressure measurement