A&D RA3100 Omniace, Инструкция по эксплуатации

Страница: 71 / 176

7.Playback Recorded Data -7.2.Playback Recorded Data
1WMPD4004444 71
7.2.3. Cursors
When CURSOR is selected for the control bar switch on the right edge of the control bar, the A
and B time axis cursors are displayed.
Cursor A Cursor B
Turn the rotary knob to
move the cursors.
(1) (2) (3) (4) (5)
(1) Cursor position data information
A: Recorded data information of the cursor A position
X is the time from the first of cursor A, and Y is the data value at the position of cursor A.
B: Recorded data information of the cursor B position
X is the time from the first of cursor B, and Y is the data value at the position of cursor B.
A-B: Information on the difference between cursors A and B
X is the time between cursors A and B, and Y is the data difference value between cursors A
and B.
b/w AB: The maximum value (MAX), minimum value (MIN), and average value (AVG) between cursors
A and B.
However, this is disabled for printer recorded data because the P-P value is used. It is also
disabled when the P-P value is selected for SSD recording.
(2) Jump to cursor key
Tap the key to move the waveform so that the cursor position is in the monitor center.
(3) Move cursor to center key
Tap the key to move the specified cursor to the monitor center.