A&D RA3100 Omniace, Инструкция по эксплуатации

Страница: 53 / 176

6.Measuring Input Signals - 6.2.Monitor Display and Pen Recording
1WMPD4004444 53
6.2.2. Pen Recording
Pen recording enables direct waveform printing to the recording paper without saving the measurement
data.
This enables single-touch simple and certain waveform recording like a conventional pen recorder.
Pen Recording
Press the PRINT key on the operation panel when the waveform format is set to Y
-
T to perform
real-time waveform printing with the printer block.
The chart speed (sampling speed) and input module settings can be changed while executing pen
recording.
Press the PRINT key on the
operation panel to start waveform
recording with the printer.
Pen Recording Mode
When PRINTER is selected as the recording device, tap the menu on the right edge of the control
bar and select PENREC to enter the pen recording mode, which enables unique functions for
recording to recording paper.
(1) (2) (3) (4) (5)
(1) Sampling speed set in WAVE on the control bar
(2) User defined chart speed (6 speeds):
Frequently used recording speeds can be registered in the preferences to enable
single-touch chart speed settings.
(3) FEED: The recording paper is fed (idle feeding) while this is pressed.
(4) Annotation printing: Tap this key during waveform recording to print annotations together with the
waveform.