A&D RA3100 Omniace, Инструкция по эксплуатации

Страница: 126 / 176

9.Using Optional Modules - 9.6.Remote Control Module (RA30-112)
126 1WMPD4004444
CAUTION
Ensure that the voltage between each input and the chassis (ground) does not exceed 42 V AC or DC.
(Damage may be caused if the voltage is exceeded.)
It is not insulated between each input. L (AGND) is connected internally.
5 Connection method
5.1 For remote control
Remote control
Terminal block AX-PCX-10S20
Terminal block connection cable RA30-504
Remote control
Remote control cable RA30-506
5.2 When connecting multiple RA3100
Remote control Remote control synchronized operation
Remote control cable (for connecting units) RA30-505
5.3 Synchronization signal for AC strain
Remote control Remote control
synchronized operation
Synchronization signal
for AC strain
Remote control cable
(for connecting units) RA30-505
5.4 Standard clock output
Standard clock output
Omniace RA3100
Host
controller
RA30-112
Terminal block
20P 20P
Omniace RA3100
Host
controller
RA30-112
20P
Omniace RA3100 Omniace RA3100
RA30-112
IN OUT
Host
controller
RA30-112
IN
20P 14P 20P
Omniace RA3100 Omniace RA3100
RA30-112
IN OUT
Host
controller
RA30-112
IN
20P 14P 20P
AC strain
module
Synchroniza
tion signal
for AC strain
AC strain
module
AC strain
module
AC strain
module
Omniace RA3100
RA30-112