A&D HV-60KGL-WP, Инструкция по эксплуатации, Страница: 46 / 71

Page 44 HVG-WP Series
15. The Function Table
The function table is the function to store and refer items that determine the
performance of the scale. Each item has a parameter.
The parameters are maintained even without power applied.
15.1. The Procedure for Setting Parameters
Step 1 Turn off the display.
Press and hold the
ZERO
key and press the
ON/OFF
key.
Step 2 Set parameters for each item using the following keys.
∧
key Selecting the parameter of an item.
Selecting the number of a figure at
f16
.
＜
key Selecting a figure at
f16
..
F
key Proceeding to the end of the table
without storing the parameter.
ENTER
key Storing a parameter for the current item
and proceeding to the next item.
Returning to normal mode from the end
of the table.
Step 3 Press the
ENTER
key to return to the normal mode, when
end
is displayed.
Note Pressing the
ENTER
key at step 2, the parameter is
stored in the scale.