A&D HC-15Ki страница 37 Скачать руководство пользователя

Страница: 37 / 60

F-06-X RS-232C Data Output

F-06-X requires OP-03 or OP-04 RS-232C interface.

Data Out Mode

Key Mode: Data is sent by pressing the PRINT key.
+ Command Mode.

Stream Mode: Data is sent continuously.
Command Mode cannot be used.

Auto-Print Mode A: Data is sent if the weight display is stable
at +5d (weighing display division) and above.
+ Command Mode.

Auto-Print Mode B: Data is sent if the weight display is
stable, at ±5d (weighing display division) and above/below.
+ Command Mode

Command Mode Only.

To use as Bar Code Reader Interface.

UFC format with Key Mode (see setting “

”).

UFC format with Auto-Print Mode A (see setting “

”).

UFC format with Auto-Print Mode B (see setting “

”).

Data to be Sent.

0100

Count data sent.

You select which data to be sent by keying in a

0 or 1

for the data: ID no., PCS (count),

weight or unit weight.

Example:

Key in 1

0 to display

1100

this setting would send only the ID number and
the count.

Data Format

Format for AD-8121 MODE 1.

Format for AD-8121 MODE 3.

No difference between “

”

and ”

” when used with the

UFC format.

Format for general apparatuses, computers, etc.

Baud Rate

2400 bps.

4800 bps.

9600 bps.

0000

Weight
PCS(count)

Unit
ID Weight

f-06-02

f-06-04

f-06-01

f-06-03

Содержание HC-15Ki





























































Результаты поиска

Содержание HC-15Ki

Отзывы:

Похожие инструкции для HC-15Ki

Бренды по названию

Популярные бренды

A&D HC-15Ki, Инструкция по эксплуатации

Результаты поиска

Содержание HC-15Ki

Отзывы:

Похожие инструкции для HC-15Ki

Бренды по названию

Популярные бренды