A&D BA-T Series, Инструкция по эксплуатации

Страница: 140 / 220

140
Breeze break auto doors
Display settings: MENU key System settings button Auto door button
[Auto doors] settings screen
1 Auto door opening/closing distance button
2 Back button
Name
Setting value
(setting range)
Description
1
Auto door opening/closing distance
button
Full, Half, Set the distance . Changes the open position of the
breeze break.
2 Back button
-
Returns to the previous screen.
Settings in the red box are default values (factory settings).
BA-T series analytical balances are equipped with auto doors that allow you to open/close the breeze
break without touching the doors.
The positions of the breeze break auto doors are automatically detected by the IR sensors on the
breeze break side surfaces.
At factory settings, the IR sensors on the left and right of the display are assigned to open and close the
breeze break doors.
At factory setting, the position each breeze break door was previously opened to is automatically
detected.
It is also possible to change the function table of the balance for the doors to be fully open or partially
open.