A&D BA-T Series, Инструкция по эксплуатации

Страница: 119 / 220

119
Repeatability check
Display settings: MENU key Calibration test/check button
Repeatability check button [Repeatability measurement] screen
1 Measurement method
2 Measurement count
3 Tolerance (standard deviation) 4 Measure button
Name Setting value (setting range) Description
1
Measurement
method
Automatic (internal weight) ,
Manual (external weight)
Select the measurement method.
2 Measurement count - Displays the measurement count.
3
Tolerance (standard
deviation)
-
Displays the tolerance (standard deviation).
4 Measure button - Executes the measurement.
5 Back button - Returns to the previous screen.
Settings in the red box are default values (factory settings).
For the internal weight, the repeatability check is automatically performed.
For an external weight, follow the instruction.
When the measurement is complete, [Repeatability measurement result] is automatically displayed.
This is common to the [Quick performance check: Repeatability measurement] screen described in
“ 6. Quick performance check: [Repeatability Measurement] Screen ”.
Repeatability measurement with the internal weight
Display settings: MENU key Calibration test/check button
Repeatability check button [Repeatability measurement] screen. In this screen,
with [Automatic (internal weight) selected for the measurement method, select
Measure button [Repeatability measurement] screen with the internal weight
2
3
1
4
Name Description
1 Back button Returns to the previous screen.
2
Repeatability measurement result
display
Displays the repeatability measurement result.
3 PRINT button Outputs the result to the device connected to the balance.
4 Exit button Exits the screen that shows the repeatability measurement result.