41
AD-4411
14.1. Setting calibration function
Refer to "6 Operation mode" to enter calibration function mode. The following explains how to change setting
values.
Item selection
[ZERO/
←
] key
Shifts the blinking digit to the left.
[TARE/
↑
] key
Increases the blinking digit by one.
[F1/
↓
] key
Decreases the blinking digit by one.
[F2/ENTER] key
Selects the displayed item and inputs the setting value.
[MODE/ESC] key
Return to mode selection.
Setting value input
[ZERO/
←
] key
Shifts the blinking digit to the left.
[TARE/
↑
] key
Increases the blinking digit by one. Use the leftmost digit to change the
polarity. An underscore (_) indicates a positive value and a hyphen (-)
indicates a negative value.
[F1/
↓
] key
Decreases the blinking digit by one. Use the leftmost digit to change the
polarity. An underscore (_) indicates a positive value and a hyphen (-)
indicates a negative value.
[F2/ENTER] key
Saves the input setting value and returns to item selection.
[MODE/ESC] key
Cancels the input setting value and returns to item selection.
Save
Cancel
Item selection
Setting value input
Polarity ("_": Positive, "-": Negative)
Содержание AD-4411
Страница 1: ...1WMPD4004595 ...
Страница 49: ...49 AD 4411 External dimensions Unit mm ...