Aaeon MIX-Q370D1, Руководство пользователя

Страница: 25 / 48

2-17
Chapter 2: Motherboard information
2.8 Connectors
2.8.1 Rear panel connectors
5 6 3 2 2 1 4
1. DC power connector. Insert the power adapter into this port.
2. USB 3.1 Gen 2 ports.
These 9-pin Universal Serial Bus (USB) ports connect
to USB 3.1 Gen 2 devices.
NOTES:
• USB 3.1 Gen 2 devices can only be used for data storage.
• Due to the design of the Intel ® 300 series chipset, all USB devices
connected to the USB 2.0 and USB 3.1 Gen 2 ports are controlled by the
xHCI controller. Some legacy USB devices must update their firmware for
better compatibility.
• We strongly recommend that you connect USB 3.1 Gen 2 devices to USB
3.1 Gen 2 ports for a faster and better performance from your USB 3.1 Gen
2 devices.
3. DisplayPort connectors.
This port connects a device with DisplayPort
connector.
4. LAN (RJ-45) ports.
These ports allow Gigabit connection to a Local Area
Network (LAN) through a network hub. Refer to the table below for the LAN
port LED indications.
LAN port LED indications
LAN port
Speed
LED
Activity Link
LED
5. Line Out port (lime). This port connects to a headphone or a speaker.
6. Microphone port (pink)
. This port connects to a microphone.
ACT/LINK LED SPEED LED
Status Description Status Description
Off No link Off 10 Mbps connection
Green Linked Orange 100 Mbps connection
Green Data activity Green 1 Gbps connection
Orange
(Blinking
then steady)
Ready to wake
up from S5
mode
_ _