Aaeon IMBM-H110A, Руководство пользователя

Страница: 38 / 52

3-6
IMBM-H110A
Interface). The AHCI allows the onboard storage driver
to enable advanced Serial ATA features that increases
storage performance on random workloads by allowing
the drive to internally optimize the order of commands.
[RAID] Set to [RAID] when you want to create a RAID
configuration from the SATA hard disk drives.
3.3.5 PCH-FW Configuration
The items listed in this screen display firmware related information.
Firmware Update Configuration
Me FW Image Re-Flash [Disabled]
Allows you to enable or disable Me firmware Image Re-Flash function.
Configuration options: [Disabled] [Enabled]
Local FW Update [Enabled]
Allows you to enable or disable the local firmware update function. Configuration
options: [Disabled] [Enabled]
3.3.6 SIO Configuration
The items in this menu allow you to configure Super IO settings.
[*Active*] Serial Port 1
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]
The following two items appear only when you set Use this device to
[Enabled].
Possible [Use Automatic Settings]
Allows you to select an optimal setting for Super I/O devices. Configuration
options: [Use Automatic Settings] [IO=3F8h; IRQ=4;] [IO=2F8h; IRQ=3]
Mode [RS-232]
Allows you to select the Serial Port mode. Configuration options: [RS-232]
[RS-422] [RS-485 (Receiver Half Duplex)]
[*Active*] Serial Port 2
Use this device [Enabled]
Allows you to enable or disable this logical device. Configuration options:
[Enabled] [Disabled]