Aaeon BOXER-8320AI, Руководство пользователя, Страница: 68 / 73

Appendix B – I/O Information 54
Fa
nl
ess
Emb
edd
ed Bo
x
PC
BO
XER
-832
0A
I
4.1 Introduction to this Section
Chapter 4 details the steps of how to load an OS image onto the BOXER-8320AI using
the Clonezilla Restore tool. Before you start, make sure you have two USB storage
devices (thumb drive) with the appropriate amount of free space. It is also
recommended that you download and install a bootable USB drive creator tool such as
Rufus before you begin.
4.2 Create Clonezilla-live USB
Step 1 Download the Clonezilla-live ISO file from the Clonezilla official website at:
https://clonezilla.org/downloads.php
Step 2 Attach one USB device to your computer and run a bootable USB drive
creator tool, i.e. Rufus.
Step 3 Find and select the Clonezilla-live ISO file from the file location.
Step 4 Click “Start” to build the Clonezilla-live USB drive.
Step 5 Select “Write in ISO Image mode” and click OK.
Step 6 Once the process is complete, click “Close”. Be sure to properly eject your USB
device before you disconnect it from the computer to prevent damaging the
device.
4.3 Create Image USB
Step 1 Download the image folder from the official AAEON website at:
https://www.aaeon.com/en/p/intel-ai-solution-myriad-x-embedded-box-pc-boxer-8320ai
Step 2 Connect the second USB device.
Step 3 Format the USB device to the FAT32 file system.
Step 4 Copy the image folder onto the USB device. Safely remove the USB device.