AAD Vigil Cuatro, Руководство пользователя

Страница: 20 / 48

16
VIGIL Cuatro
The following messages are shown:
• « Bat OK »
The battery pack is functioning properly.
• « Cut OK »
The cutter resistance is tested O.K.
• «
Ctrl OK »
The electronic circuits are functioning properly.
If an error is detected the following messages may be shown:
• «
Bat Low » Low Battery, the Vigil
®
Cuatro is still operational, but the dual battery pack must be replaced as
• « Bat Rpl »
• « Cut Err »
• «
Ctrl Err »
soon as possible. * (see page 31 § 7.1)
The dual battery pack must be replaced, the Vigil
®
Cuatro will not switch on.* (see page 31 § 7.1)
Cutter resistance is out of tolerance, the Vigil
®
Cuatro will not switch on.
A discrepancy in one of the electronic circuits is observed, unit will not switch on.
If one of these messages is displayed (except for «Bat Low»), the startup procedure will end, and the Vigil
®
Cuatro will
switch itself off.
If the « Bat Low » message appears, the battery pack must be replaced as soon as possible (see page 31 § 7.1)
If the « Bat Rpl » message appears, the battery pack must be replaced prior to the next jump (see page 31 § 7.1)
If the « Cut Err » message appears, the cutter unit must be replaced prior to the next jump (see page 3 2 § 7.2).
A new cutter will be supplied free of charge if a completed “Life Saving Report” is posted and approved
(see our website http://www.vigil.aero/ on the download page).

We recommend that Vigil
®
Cuatro parts (exept the batteries) be replaced by a propper certified and authorized
rigger or by a Vigil
®
approved expert.
The regulations in some countries require a certified rigger to do such replacements. The user may not have
authorization to replace the cutter or controller unit. In such situations, you must adhere to your country’s rules.
If the «Ctrl Err» message appears due to a failure in the electronic circuits, you must send the Vigil
®
Cuatro
back to your dealer or to the factory for a complete checkup, before the next jump. (see page 34 § 7.4 ) .
If the «Ctrl Err» message appears DO NOT try to restart the Vigil
®
Cuatro again.