AAD S-7 Скачать руководство пользователя страница 6

3.

Do not use the subwoofer near water or expose them to rain or moisture.

4. Always unplug the power cord first when making connections. Switch power on 

only after you check and make sure all connections are made correctly.

5. Unplug the power cord from the outlet when you are not going to use the subwoofer 

for a long period of time.

6. To clean, unplug the power cord from the outlet first. Use a damp cloth only to 

wipe dust of the surface. Do not use any liquid cleaners.

7. Do not put coffee cups or other objects on top of the cabinet. They can be shaken 

off when the subwoofer is in operation as it can produce a lot of vibration.

Introduction

The S-160 was designed to give remarkable bass performance and matches perfectly 

with the S series loudspeaker systems. Every component was matched from the ground 

up. The transducer was aligned to the enclosure loaded by using extensive computer 

analysis. The amplifier response was tuned critically to get the most performance out 

of the woofer. It has precision filters for both sub-sonic and low bass, so that the 

subwoofer can play at high output levels without stress and integrate perfectly with  S 

series  speakers. 

The computer aided designed enclosure is built from rigid MDF and laminated in a 

tough vinyl which under proper care will keep its beautiful looks for a lifetime.

The 10

 woofer can deliver deep bass at realistic levels, when set up correctly in small 

listening rooms. It is a proprietary design for sub bass reproduction. It features 

massive magnet assembly with deep gap and a long travel, high power 4-layer 

copper/Kapton voice-coil assembly. The rigid piston diaphragm was developed to stay 

under control as the high air pressures developed inside the enclosure could bend a 

conventional cone and thus cause distortion and a loss of bass.

The 100watts class AB solid state amplifier is custom built for the S-160, which 

matches perfectly to the 10

 driver. An analysis was taken of the driver excursion 

across its operational bandwidth for every frequency and the amplifier's output 

voltage response curve tailored to fit exactly the linear mechanical limits of the 

driver's excursion capability. On the contrary, the S-160 produces tight, deep, 

powerful and yet musical bass. Suitable for home theater or music-lovers alike, it is 

capable of giving years of uncompromising performance. 

-5-

Содержание S-7














Отзывы: