AAD S-7, Информация владельца

Страница: 4 / 13

-3-
Placement
Two Channel Stereo Application
For stereo listening, you may choose any one pair of bookshelf or rear surround or floor
standing model. The size of speakers should be determined by the size of your living space so
that they can provide sufficient volume. The two loudspeakers should be placed an equal
distance from your listening position.
Bookshelf systems will benefit from placement on stands or wall brackets. The S-Series
stands are designed to match the bookshelf speakers functionally and aesthetically.
Rear surround speakers will benefit from being hanged in wall or ceiling with wall brackets.
Placing the loudspeakers in corners or against a wall will result in the strongest (but not
necessarily the most accurate) bass. For the best stereo imaging, we recommend that the
systems be placed so that the high frequency transducers are as close as possible to the ear
level of a seated listener.
Every room has different acoustic characteristics and people have different tastes in sound.
You should experiment to find out the placement position that satisfies your personal tastes.
Home Theater Application
To get the best surround sound from your S-Series speakers, we recommend to place the
speakers at the same distance from the listening position. As for rear surround speakers, when
mounting them on side walls perpendicular to the listening position, they should be placed
60-90cm above the listener ´ s ear level at sitting down position.
The center speaker, should be placed close to TV monitor above or below.
Connections
Note: Make sure your amplifier is off and disconnected from power while you are connecting
speakers to amplifier. Turn your amplifier on only after you check and make sure speakers are
properly connected.
Two Channel Stereo Application
Connections are made at the terminals located on the back of the loudspeaker system. The
terminals accept spade plugs, bare wire or banana plugs. For best results, use high quality
speaker cables.
All S-Series loudspeakers have 2 insulated heavy-duty gold plated binding posts.
For each channel, the red terminal on the loudspeaker should be connected to the red or (+)