AAB M22302-W, Быстрое руководство

Страница: 5 / 16

Q U I C K G U I D E 5
Interface description
Audio module on the video aluminum outdoor station
No. Description
1 Connector for camera module
2 Connector for device software update
3 Plug-in clamps (COM-NC-NO) for floating output, door opener (30
V AC/DC 1 A)
4 Plug-in clamps(Lock-GND) for door opener (18 V 4 A impulsive, 250
mA holding)
5 Plug-in clamps(DC-GND) for additional power supply
6 Plug-in clamps(a-b) for Bus connection
7 Connector for induction loop module
8 Connector for next module
9 Connector for exit pushbutton
10 Connector for sensor to check the door status
11 Rotary switch to set the address of OS (1-9)
12 Set feedback tone of push button: ON/OFF
13 Configure push button as single column or double columns (ON=
double columns; OFF= single column)
14 Configure function of 1st / 2nd push button
3->OFF, 4->OFF=call indoor station/call indoor station;
3->ON, 4->OFF=switch on lightings/call indoor station;
3->OFF, 4->ON=call guard unit / call indoor station;
3->ON, 4->ON=switch on lightings / call guard unit.
15 Adjust loudspeaker volume
16 Adjust door lock release time, 1-10 seconds
No. Description
1 Station
Jumper to set the address of default outdoor station.
2
X100 X10 X1
Jumper to set the address of the indoor station.
3 Master /Slave function
Only one indoor station in each apartment must be set as “Master”
(Jumper should be set as ‘M/S on’). All additional indoor stations in
the same apartment must be set as “Slave” (Jumper should be set
as ‘M/S off’).
4
Terminal resistor
In video installations or mixed audio and video installations, the
Jumper must be set as ‘RC on’ on the last device of the line.
5 a b = Bus connection
6 a potential free contact, such as a doorbell pushbutton
7 DC GND = Additional power supply
1 2
3 4 5 6 7 8 9 10
11
12
13
14
15
16
X100 X1 0
5
1- 9
1
024
2
4
3
6
7