Digital Video Recorder User Manual
Up to 4 rules can be configured.
Figure 9-3 Draw Line for Line Crossing Detection
Step 8 Click
Apply
to activate the settings.
The sudden scene change detection and the line crossing detection cannot be enabled at the same
channel.
9.4 Intrusion Detection
Purpose
Intrusion detection function detects people, vehicle or other objects which enter and loiter in a
pre-defined virtual region, and some certain actions can be taken when the alarm is triggered.
Step 1 Enter the VCA settings interface.
Menu> Camera> VCA
Step 2 Select the camera to configure the VCA.
You can check the checkbox of
Save VCA Picture
to save the captured pictures of VCA
detection.
Step 3 Select the VCA detection type to
Intrusion Detection
.
Step 4 Check the
Enable
checkbox to enable this function.
Step 5 Click
to configure the trigger channel, arming schedule, linkage action and PTZ linking
for the intrusion detection alarm.
128
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
