background image

RESIDENTIAL GAS WATER HEATERS

Installation and Operating Manual

2006  

100324051_2000579115 

  _Rev. 01

KEEP THIS MANUAL IN THE POCKET ON HEATER FOR FUTURE REFERENCE

WHENEVER MAINTENANCE ADJUSTMENT OR SERVICE IS REQUIRED.

POWER DIRECT VENT GAS ULTRA LOW NOx MODELS

WITH HOT SURFACE IGNITION

• 

For Your Safety

 •

AN ODORANT IS ADDED TO THE GAS USED

BY THIS WATER HEATER.

Read and understand instruction 
manual and safety messages 
before installing, operating or 
servicing this water heater.
Failure to follow instructions and 
safety messages could result in 
death or serious injury.
Instruction manual must remain 
with water heater.

WARNING

ALL TECHNICAL AND WARRANTY QUESTIONS:

 SHOULD BE DIRECTED TO THE LOCAL DEALER FROM WHOM THE WATER HEATER WAS 

PURCHASED. IF YOU ARE UNSUCCESSFUL, PLEASE CONTACT THE COMPANY LISTED ON THE RATING PLATE ON THE WATER HEATER.

GPDNL-40   
GPDNL-50   

SERIES 100

   

   

- Do not store or use gasoline or other flamma-

ble vapors and liquids in the vicinity of this 
or any other appliance.

- WHAT TO DO IF YOU SMELL GAS:

  • Do not try to light any appliance.

  • Do not touch any electrical switch; do not 

use any phone in your building.

  • Immediately call your gas supplier from a 

neighbor's phone. Follow the gas suppli-
er's instructions.

  • If you cannot reach your gas supplier, call 

the fire department.

- Installation and service must be performed by 

a qualified installer, service agency or the 
gas supplier.

WARNING: If the information in these instruc-
tions is not followed exactly, a fire or explosion 
may result causing property damage, personal 
injury or death.

Содержание ProLine XE GPDNL-40 Series





























































Отзывы: