A-Neuvideo ANI-5PLAY, Инструкция по эксплуатации

Страница: 7 / 12

5
OPERATION CONTROLS AND FUNCTIONS
RECEIVER
q
OUTPUT LED:
Output status indicating lamp. This red LED illuminates when the TV is connected to a HDMI cable.
w
HDMI OUT:
HDMI output port. This slot is where you connect the HDTV or monitor with a HDMI cable.
e
ETHERNET:
This slot provides internet signal from the transmitter or to the transmitter.
r
RS-232:
Phoenix jack provides Serial port control from the transmitter or to the transmitter.
t
DC IN:
Plugs the 24V DC power supply into the unit.
y
IR RX:
Chanel 2 IR Receiver. Connects with the Wideband IR Rx.
u
IR TX:
Chanel 1 IR Transmitter. Connects with the Wideband IR Tx.
i
LINK LED:
The connection status indicating lamp.
• Illuminated:
The Transmitter and Receiver have good connections.
• Flashing:
The Transmitter and Receiver have poor connections.
• Dark:
The Transmitter and Receiver are not connected.
o
HDBaseT
™
IN:
HDBaseT
™
signal input port. Connects the HDBaseT
™
transmitter with a UTP cable following IEEE-568A or IEEE-568B
standards.
a
DATA LED:
Data status indicating lamp.
• Illuminated:
The HDMI signal has HDCP.
• Flashing:
The HDMI signal is without HDCP.
• Dark:
No HDMI signal.
A NEU VIDEO