A-Neuvideo ANI-0104VC, Инструкция по эксплуатации

Страница: 3 / 7

TABLE OF CONTENTS
CONTENTS
Introduction ........................................................................1
Package Contents .............................................................. 1
Features ............................................................................. 2
Specifi cations ..................................................................... 2
Panel Descriptions .............................................................. 3
Connection and Operation ................................................... 4
Dear Customer
Thank you for purchasing this product. For optimum performance
and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this
manual for future reference.
INTRODUCTION
This VGA CAT5 Extender 1x4 Splitter with Audio is an ideal device
for local displaying and remote viewing. It combines split function
and extension function. It distributes the input of the VGA signal
and audio signal into the four identical outputs simultaneously.
Each receiver by CAT5 x1 works with the Sender as a full functional
module by receiving the distributed signal from the sender and
transmitting to displays individually. Only by the most inexpensive
CAT5 cable with cross stand inside, the full functional module
extend the VGA display max up to ~1000 ft. / 300m.
It offers solutions for VGA retail and show site and Projector
factory, noise space and security concerns, data center control,
information distribution, conference room presentation, school and
corporate training environments.
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging
and make sure the following items are contained in the shipping
carton:
• VGA CAT5 Extender 1x4 Splitter
• (4) Receivers
• 5V@2A DC Power Supply for VGA CAT5 Extender 1x4 Splitter
• (4) 5V@2A Power Supply for Receivers
• Users Manual
1
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of fi re,
electrical shock and injury to persons.
• To prevent fi re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the
PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow
for suffi cient space for air to circulate around the unit.
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. We assume no responsibility for any
infringements of patents or other rights of third parties which may
result from its use.
We assume no responsibility for any inaccuracies that may be
contained in this document. We make no commitment to update or
to keep current the information contained in this document.
We reserve the right to make improvements to this document and/
or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer fi le, in any form or by any means
— electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise — without express written permission and consent
© Copyright 2011. All Rights Reserved.
Version 1.2 JUNE 2013
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may
be trademarks of the companies with which they are associated.