A.M.I Italia Saver One P, Руководство пользователя

Страница: 52 / 81

52
10 ECG M
ONITORING
The Saver One P defibrillator can also be used to monitor the patient's ECG tracing. The "ECG Monitoring" mode
allows the operator to monitor the patient's cardiac rhythm in total safety by disabling automatic defibrillation (in
order to perform defibrillation, exit the current mode and select semi-automatic defibrillation).
The ECG trace of the patient in this mode can be read with the help of two different accessories:
-
Using the defibrillation PADs
-
Using the 2-pole ECG cable SAV-C0017
The Saver One P allows you to view one single ECG channel by analysing lead II. Since the use of this mode is indicated
for specialized medical personnel, in order to be started, it requires entering a security password (see the following
paragraphs for more information).
In this mode the defibrillator does not allow charging and does not allow defibrillation.
This mode is intended for exclusive use by specialized medical personnel. The password must only be used
by medical personnel.
In monitoring mode, the internal capacitor is not intended to store any energy and is always discharged,
therefore this operating mode is extremely safe
10.1 A
CTIVATION OF
ECG M
ONITORING MODE
After switching it on, the Saver One P will automatically start the semiautomatic defibrillation mode. In order to start
the ECG Monitoring mode you must enter the menu and select the new mode.
1 Enter the main menu by pressing the enter key on the device keypad as shown in figure (38)
For more information on the Saver One P menu, refer to the relevant paragraph
Figure 38