SecuGuard Basic V.5
1. Main-console
61
1.9.2.2 Event Setting/ Edit Event /
Advance Setting/ Motion:
1.
Define motion detection area:
Click “Default” button to select all
image for motion detection.
Select “Add” and use mouse to
specify a rectangle window to add a
detection area.
Select “Delete” and use mouse to
specify a rectangle window to remove a
detection area.
The area covered by transparent red
color is motion detection area.
2.
Set motion detection sensitivity:
Set the motion detection sensitivity level between 1 and 5. Level 5 means the
highest motion detection sensitivity.
3.
Set detection interval:
Set this value to define the interval of motion detection. If set longer value, means
system will use less CPU computing power to check motion detection.
4.
Adjust parameter by detection result:
When motion detection event is triggered, system will display “M” at left-up corner
and you can adjust these two parameters by checking detection result to get best
settings.
1.9.2.3 Event Setting/ Edit Event / Advance Setting/ Digital Input:
In this mode, system will check
status of Digital Input periodically.
Select “Open” or “Close” to define
which status will trigger an event.
