SecuGuard Basic V.5
1. Main-console
48
1.5.5 Add or remove special day:
If you want to add a new special day into
system, choose a day from date-time picker
control, then click the “Add” button.
If you want to remove a special day from system, click the special day on the tree
control at right of dialog, then click the “Delete” button.
1.5.6 Add schedule time slice:
You can define a time slice as below:
1.
Select Start time and End time from date-time picker control:
Click on the hour section or minute
section, then key in the time value, or
click the “
▲
” or “
▼
” to increase or
decrease the time value.
2.
Drag time slice bar from
time table:
Move mouse cursor to the empty zone on time table in which you want to add.
Press and hold mouse left button, drag cursor to right until touch the End time
which you need, then release the left button of mouse.
After drag action, a new gray bar was show on the time table. The left end of
the time bar means this slice’s Begin time and right end means End time.
The mouse cursor must drag on empty zone, or this action will be not
successful.
After time slice define completed, system will popup the “Record Setup” dialog.
Please refer to “
Record Setup Page
” as below.
