background image

33

A-iPower Corp.

 

 

LIMITED WARRANTY 

KEEP YOUR RECEIPT.

 Proof of purchase will be required to substantiate any warranty claim. 

WHAT  IS  COVERED: 

A-iPower  Corp.  warrants  to  the  original  retail  purchaser  in  the  United 

States of America, or Canada that this product is free of defects in material and workmanship and 
agrees,  at  A-iPower  Corp’s  direction,  to  either  repair,  provide  replacement  parts  for,  or  replace 
(without charge for parts or labor) any product or component with a material defect for a period of 3 
years from the date of purchase, except as limited below. Warranty service and replacement parts 
are  warranted  only  for  the  duration  of  the  warranty  on  the  original  product.  All  replaced  parts  or 
products become a property of A-iPower Corp. 
This product is also covered by an Emissions Control System Warranty which is separate from and 
in addition to the warranty. 

Warranty 

 A-iPower Limited Warranty – 3 Years Residential and 1 Year Commercial 
3 year Residential warranty applies as follow: 1

st

 year Parts & Labor / 2

nd

 & 3

rd 

year Parts ONLY 

Thank you for choosing A-iPower products. To ensure proper registration of your product 
warranty, please submit your warranty registration along with proof of purchase within 10 days 
of the date of purchase, this can be done by  

a)  Completing the Warranty Registration form at the back of this manual and mailing to: 

A-IPOWER CORP 
10887 COMMERCE WAY UNIT A 
FONTANA CA  92337 USA 

b)  Visit us at 

www.a-ipower.com

 and click the product registration icon 

Warranty Term 

A-iPower will provide warranty for any of its products purchased through any authorized A-
iPower dealer in North America  to the original purchaser and will be warranted against defects 
in material or workmanship for a period of three (3) years for Consumer use from date of 
purchase, subject to exclusions noted herein. Commercial and Rental applications are 
warranted for a period of one (1) year from date of purchase. 

“Consumer Use” – residential household use by a retail consumer

“Commercial Use” –  all other use – commercial , business, industrial, or rental purpose 

How to Obtain Warranty Service 

Please call our Customer Service Dept.  855-888-3598 or e-mail to 

[email protected]

Please have necessary information available – Model Number, Serial Number, Proof of 
Purchase 

Содержание SUA4000i









































Отзывы: