8x8 Inc 6739i, Руководство пользователя

Страница: 18 / 33

14 Model 6739i IP Phone Installation Guide
Instal
lation and Setup
Install on the Wall
The 6739i IP phone has two pre-drilled wall mounting holes on the back of the
phone.
1. Using the provided wall mount drilling template, locate and mark the position
for the mounting screws on the wall. Depending on the wall type, you may
need to use wall anchors. Both the screws and wall anchors are included with
your phone.
2. Place the wall mount holes on the phone over the screw heads on the wall
and pull down to lock the phone in.
Note: You may wish to purchase a short Ethernet cable from a local supplier for a wall
installation. Also, if 802.3af compliant in-line power is not provided on your net-
work, and you are installing the 6739i on a wall using a PoE in-line power injector,
you may also wish to use an equivalent flat Ethernet cable rather than the one pro-
vided.
3. In the handset cradle, there is a small clip that sits flush with the cradle sur-
face. Using a small flathead screwdriver, pull the clip up and remove it from
the phone.
4. With the arms on the clip facing you and the flat side of the clip towards the
phone, turn the clip 180 degrees and reinsert it back into the clip cavity in the
phone’s cradle.
5. Push the clip in until it snaps into the slot flush with the surface and only the
Wall Mount Holes