INSTALLATION GUIDE
Fast Ethernet Switch 10/100Mbps
FES-5D / FES-8D
EN
V 1.1_20110309
COPYRIGHT & TRADEMARKS
We reserve the right to change the product specification without notification.
is a registered trademark of 8level. No part of the manual may be reproduced, translated
or processed in any other form without permission from 8level NEXT LEVEL IN NETWOR-
KING. All rights reserved. Copyright © 2011 8level.
CE DECLARATION OF CONFORMITY
The product fulfils the following requirements according to EMC DIRECTIVE EMC:89/336/E-
EC and EMC 92/31EEC:
EN55022
EN55024
SAFETY NOTICE
Do not use this product near water. Using the product during a thunderstorm should be
avoided. Do not place heavy objects on the casing.
RECYCLING NOTICE
The symbol of the crossed-out wheeled bin on this product means that it is
forbidden to place the equipment waste together with other waste (under
penalty of fine). Detailed information about recycling of the product can be
obtained at local authorities, local waste treatment plants or local
distributors. Forwarding the equipment waste to recycling or recovery
points helps to avoid the negative influence of the harmful components present in the
equipment on the environment and human health; in this scope the primary role is played
by each household.
-1-
-2-
-3-
PACKAGE CONTENTS:
- FES-5D/FES-8D switch
- AC power supply adaptor
- Installation guide
CHAPTER I (Installation):
1) Plug the adaptor into a socket
2) Plug the adaptor into the device. LEDs will show the working status of the device:
a) When the power is turned on, all the LEDs will flash
b) POWER LED (red) will be on permanently
CHAPTER II (Features and specification):
5/8-port 10/100Mbps switch supports the function of auto-negotiation and automatic
crossing.
Compliant with IEEE802.3x standard for data flow control for full duplex mode
Casing enables mounting on a wall
External power supply adaptor
Ideal for using at home and small offices
Easy Plug&Play installation
Low energy consumption
CHAPTER III
(External layout – on the example of FES-5D):
1) Front panel
__ _ _
www.8level.eu
Power LED:
shows that the power is on.
Link/ACT LEDs:
LED flashing green means that the device is connected through the
correct port. If the LED is flashing, it means that data transfer is in progress.
2) Rear panel
5 Port Fast Ethernet Switch
Link/Act
Power
5
1
2
3
4
FES-5D
Front panel and LEDs of FES-5D switch
Rear panel of FES-5D switch
NOTE_1:
UP-LINK port in FES-5D switch can be used for connecting another switch if
necessary.
NOTE_2:
There are 8 10/100Mbps ports on the rear panel of FES-8D switch.
-4-
Specification
Standard
IEEE802.3u 100base-TX Fast Ethernet, IEEE802.3 10base-TX Fast
Ethernet, IEEE802.3 10base-T Ethernet, ANSI/IEEE802.3 N-way
Data Transmission
Ethernet: 10Mbps (Half Duplex), 20Mbps (Full duplex);
Fast Ethernet: 100Mbps (Half Duplex), 200Mbps (Full duplex)
Number of ports
5 10/100Mbps ports in FES-5D / 8 10/100Mbps ports in FES-8D
LED
Power (red), Link/Act (green)
Power
AC5,5V–0.25A for FES-5D; AC9V–0.13A for FES-8D
Working Temperature
0
˚
C–40
˚
C (32
˚
F–104
˚
F)
Working Humidity
10%–90%
