Passive Multiple
Kit Builder’s Guide for PCB v1.0
4mscompany.com
PASSIVE MULT
This guide is for building the Passive Mult (PM)
,
a two channel multiple. The PM allows you to split a
single signal into multiple copies. The PM can work in a single one-to-six multiple or as a dual one-to-
three multiple. Since the device is passive, it can also be used to combine signals (three-to-one, or six-to-
one). This is a beginner level kit, with only basic tools and soldering experience necessary.
Tools Needed:
•
Soldering iron, solder
•
5/16” socket driver (optional: pliers will work if you're careful)