4IPNET WHG315, Руководство пользователя

Страница: 320 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
320

CAPWAP Status: The configuration status of CAPWAP function. Click Enable to turn on the Access WHG
Controller to allow CAPWAP supported AP’s to automatically add to the managed AP List.

Apply Certificate to APs: This configuration item allows the administrator to select which of the certificates
will be used during CAPWAP negotiation between AC and AP. If the certificate selected is invalid, the
negotiation will be unsuccessful and the AP will not be automatically added in the managed List.

Trusted Certificate Authority (CA): This configuration item allows the administrator to select a Trust CA to
validate the certificate used for CAPWAP.

Access Controller IP List: The AC can statically designate other CAPWAP supported ACs as backup AC
for CAPWAP APs in case it can no longer provide service. The number designates the priority of these
backup ACs to the AP, in the event that the original AC is down, the AP will first attempt to join the No. 1
backup AC and so on.
j) Rogue AP Detection
It is designed to detect the non-managed or possibly malicious AP in the deployed environment. It takes
the managed APs as sensors to find the non-managed AP even if the AP uses the same SSID with
managed AP's. It shows the AP's BSSID, ESSID, Type, Channel, Encryption, and found time.