4IPNET WHG315, Руководство пользователя

Страница: 300 / 368

User’s Manual
WHG Controller / HSG Gateway ENGLISH
300
the bottom of the window, the selected Rogue AP on this list can be added into the trusted list or deleted
if it can be ignored.

General Configuration

Scanning Interval:
The unit for this field is minute. Enter 0 to disable “Rogue AP Detection”. To enable
“Rogue AP Detection”, please enter an integer ranging from 1 ~ 999 as the detection interval.

Sensor List Config

AP Type: The drop down menu will contain the manageable model type for selection. The managed
APs of the selected model type will be listed in the scroll window below.
Administrator can check on one or more of the listed AP and click apply button at the bottom to designate
these APs as scanners.

Trusted AP Config

BSSID: Administrator can statically assign the BSSID of a known trusted AP in this list. If an AP is
entered into this list but not managed yet is present in the environment, it will not show up in the Rogue
AP device list.

Remark: Administrator can type in a string of additional information that relates to the trusted AP on the
list.
j) AP Load Balancing
This is a function to prevent managed APs from overloading. When the system detects the occurrence of
APs' associated-client numbers exceeding a predefined threshold and other APs in the same group are
still below the threshold, the balancing function will be activated to decrease the overloading APs' transmit
power and increase other available APs' transmit power; this will allow other available APs to have more
chance of being associated. The system can divide the managed APs into groups; define the group
threshold, and the time interval which will trigger the AP load balancing.