4IPNET EAP210, Руководство пользователя, Страница: 50 / 166

User’s Manual
Enterprise Access Point ENGLISH
Copyright © 4IPNET, INC. All rights reserved.
49
2.4 Access Web Management Interface
4ipnet Access Points support web-based configuration. When hardware installation is complete, the AP can
be configured through a PC by using a web browser.
The default values of the AP
’s LAN IP Address and Subnet Mask are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Example of entering the AP's default IP Address into a web browser

To access the web management interface (WMI), connect the administrator PC to the LAN port of the
AP via an Ethernet cable. Then, set a static IP Address on the same subnet mask as the AP in
TCP/IP settings of your PC, such as the following example:
IP Address : 192.168.1.100
Subnet Mask : 255.255.255.0

Note:
Please note that the IP Address used should not overlap with the IP Addresses of
any other device within the same network to avoid IP conflict.

Launch the web browser on your PC and enter the IP Address of the AP ( 192.168.1.1 ) at the address
field, and then press Enter . The following Administrator Login Page will
appear. Enter “admin” for
both the Username and Password fields, and then click Login .
Administrator Login Page

After a successful login into AP, a System Overview page of the Web Management Interface (WMI)
will appear.