4Ddoors CX1024, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 42

ENGLISH 20
OK
OK
OK
OK
Ð
Ï
Ï
Ï
Ð
Ð
7.7 Running speed in the close direction
This menu allows you to set the running speed in the close direction.
The value displayed represents the gate running speed in %.
OK
OK
OK
OK
Ð
Ï
Ï
Ï
Ð
Ð
7.8 Soft running speed
This menu allows you to set the soft running speed.
The value displayed represents the gate speed in %.
OK
OK
OK
Ï
Ï
Ï
Ð
Ð
Ð
7.9 Start-up suppression
This menu allows you to activate start-up suppression.
With start-up suppression activated, the values set in menus
P14.o or P14.c are
ignored during the fi rst 2 seconds of the start phase, and the motor is run at maximum
power.
nEin Function is deactivated.
JA Function is activated.
OK
OK
OK
OK
Ï
Ï
Ï
Ð
Ð
Ð
7.10 Warm-up ramp in the open direction
This menu allows you to set the length of the warm-up ramp in the open direction, in
order not to unnecessarily burden the motor.
With this function, the power of the motor is slowly increased during the start phase,
according to the set value, until the value in menu
P14.o is reached.
The higher the value, the longer it takes for the motor to reach nominal power.
OK
OK
OK
OK
Ï
Ï
Ï
Ð
Ð
Ð
7.11 Warm-up ramp in the close direction
This menu allows you to set the length of the warm-up ramp in the close direction, in
order not to unnecessarily burden the motor.
With this function, the power of the motor is slowly increased during the start phase,
according to the set value, until the value in menu
P14.c is reached.
The higher the value, the longer it takes for the motor to reach nominal power.