3Z TELECOM Antenna W.A.S.P., Руководство пользователя

Страница: 25 / 59

25
Step 8 - Configure the Data Collector with Antenna WASP
Sensors
The Data Collector must be configured with Antenna WASP information before they will
wirelessly connect and begin reporting position information. To configure the Data
Collector with new WASP sensor information, do the following:
1. Click the
‘Add/Remove Antenna WASP’ link
in the left pane of the
manager window and the configuration window will appear as
shown below.
2. Click
‘Add Antenna WASP’
button and a screen will appear in the
right pane and prompt you to enter Antenna WASP information as shown
below.