S-Series Camera Quick Start Guide |
VX-4M-OD3-RIAWD
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
8
INSTALLATION – PREPARING CAMERA HOUSING
1.
If routing the cable through the base of the camera, route the cabling through the hole you drilled in
the installation surface (
A
). If you are routing the cable through the side of the camera, no action is
required (
B
).
1.
Using a Philipps-head screwdriver, attach the
GND
wire to the grounding terminal located in the
camera’s housing