3Ware 9650SE-24M8, Руководство пользователя

Страница: 16 / 45

Chapter 1. Getting Started
12 3ware 9650SE Serial ATA RAID Controller Installation Guide
ESD (Electrostatic Discharge) Precautions
To avoid damaging computer components and accessories when
installing or removing the 3ware RAID controller, follow standard
electrostatic discharge (ESD) precautions:
„
When your computer case is open and its internal parts are
exposed, do not touch any internal part unnecessarily.
„
Always wear a grounded strap or work on an ESD-protective
mat.
„
Do not remove the 3ware RAID controller from its protective
bag until you are properly grounded.
„
Handle the 3ware RAID controller by its edges or by the black
rail and metal bracket at its two ends.
„
Do not touch any pin, contact, lead or component on the 3ware
RAID controller.
Installation Considerations
Air Flow, Cable Length, and Routing Space
Adequate airflow and ventilation are particularly important for
3ware 9650SE RAID controllers. The on-board heat sink collects
heat, and must have adequate airflow in order to disburse it. It is
important that the cables do not obstruct the air flow or prevent
proper ventilation of the system.
Selecting the Slot in Which to Install the Controller
Consider these factors when deciding on the slot in which to insert
the controller:
„
Cable routing may be easier if you install the 3ware RAID
controller next to an open slot.
„
3ware 9650SE RAID controllers must be installed in PCI
Express® slots. Table 1 on page 3 shows the type of PCI
Express slot required for each 9650SE model.