•
Done
- Accepts changes and closes the alignment tool.
•
Bite 1
- Always required: For quadrants, Bite 1 is the only bite scan required. For full
arches, it is one of the two bite scans required.
•
Bite 2
- Only required if scanning full arches. Must be the opposite side to Bite 1.
MANUAL ALIGNMENT
(optional)
Besides automatic alignment, the software also lets you perform the alignment of one and two bite scans
manually:
Step 1: Reset automatic alignment
Press the
Reset
button in the scanning toolbar to cancel the current automatic alignment if the
Use
automatic bite alignment
Step 2: Place marker points
Follow the instructions on the screen to place marker points on the upper/lower jaws and occlusion scans.
Alignment is processed on placing the last marker point.
Step 3: Complete alignment
The
Undo
button allows you to cancel the last action while, pressing the
Done
button completes the
alignment and closes the alignment tool.
30
