background image

 

 

PS1005G-1GT-4PoE User Manual 

 

Chapter 1 Product Introduction                 

Congratulations on your purchasing of the Gigabit PoE Ethernet switch. Before you 

install and use this product,  please read this  manual  carefully for full exploiting the 
functions of this product. 

1.1 Product Overview 

The product which is fully compliance with IEEE802.3at standard, is a PoE Ethernet 

Switch with five Gigabit Ethernet ports can be used for any 10/100/1000Mbps link. There 
are 4 Power Sourcing Equipment (PSE) on the Switch, which can give power to 
IEEE802.3at Compliant Powered Devices(PD). 

The Switch designed with the characteristics such as: high integration level, exquisite, 

easy to operate and portable, is suitable for the household and office network environment 
with small or middle scale. It is an ideal choice to promote the performance of the 
department and working group, can provide you a high-performance network applicable 
solution in simple, economical and standard ways. The Switch provides several 
easy-understood LED indicators on the front panel, so that you can judge the working 
state of the Switch and diagnose the network failure in a really efficient way. 

1.2 Features 

  Supports 5 x10/100/1000Mbps Auto-negotiation Ethernet RJ45 ports with 4 port PoE 

function (port2~port5). 

  Supports PoE power supply up to 30W for each PoE port and 60W for all PoE ports. 

  Comply with IEEE802.3i, IEEE802.3u, IEEE802.3x, IEEE802.3ab and IEEE802.3az. 

  Supports PoE IEEE802.3af and IEEE802.3at compliant Powered Device (PD). 

  Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for 

Half-Duplex Mode. 

  2K entry MAC address table with auto-learning and auto-aging. 

  LED indicators for monitoring power, link, activity, PoE and max power for PSE. 

  External power adapter supply. 

  Power interface and communication interface both have anti lightning protection 

function. 

1.3 

 

Package Contents 

Before installing the Switch, make sure that the following “packing list” is OK. If any 

port is lost or damaged, please contact your local agent immediately. In addition, make 
sure that you have the tools to install switches and cables by your hands. 

  One Switch 

  One External power supply 

  One User Manual 

Содержание PS1005G-1GT-4PoE









Отзывы: