User manual
12
5.4.1 Device information
Equipment information mainly display basic information, MES5000 series include: equipment type, equipment
name, description of the equipment, equipment, hardware version number, firmware version, the MES5000
series of MAC address, contact method. As shown in figure 5.3.3
（
Figure 5.3.3
）
5.4.2 Port information
MES5000 series a total of 8 ports, ports can confirm whether the port with the equipment complies with
the information bar. Equipment at work, via the port status of the port information in the status view, for
example in the figure below you can see port 4 is LINK and port connection status as FULL, speed is 100M and
port type for the TX(RJ45). As shown in Figure 5.3.4.
LINK
：
Indicates that the port is in a connected state
；
LOS
：
Indicates that the port is not connected
；
FULL
：
Indicates that the port State is full duplex
；
HALF
：
Indicates that the port State is half-duplex (if the ports are not connected, the port status is HALF)
；
