3onedata IES6306 Series Скачать руководство пользователя страница 16

Страница: 16 / 263

User Manual

3onedata proprietary and confidential

Undo: Click to undo any changes made locally and revert to previously saved values.

2.1.2 System Information Monitor

The switch system information is provided here.

Contact

System contact configured by the path "System > System Information Configuration >
System Administrator".

Name

System name configured by the path "System > System Information Configuration >
Information > System Name".

Position

The location configured in “System > System Information Configuration > Information >
System Location”.

MAC Address

The MAC Address of this switch.

System Date

The current (GMT) system time and date. The system time is obtained through the
Timing server running on the switch, if any.

System Uptime

The period of time the device has been operational.

Software Version

The software version of this switch.

Software Date

The date when the switch software was produced.

Содержание IES6306 Series








































































































































































































































































Результаты поиска

Содержание IES6306 Series

Отзывы:

Бренды по названию

Популярные бренды

3onedata IES6306 Series, Руководство пользователя

Результаты поиска

Содержание IES6306 Series

Отзывы:

Бренды по названию

Популярные бренды