IAP2300F-2N2-5T-PDP12_36
2.4G wireless single-band AP
Quick Installation Guide
3onedata Co., Ltd.
Address: 3/B, Zone 1, Baiwangxin High Technology
Industrial Park, Song Bai Road, Nanshan
District, Shenzhen, 518108, China
Website: www.3onedata.com
Tel:
+86 0755-26702688
Fax:
+86 0755-26703485
【
Package Checklist
】
Please check whether the package and accessories are intact
while using the industrial wireless AP for the first time.
1. Wireless AP x1
2.
WIFI antenna x2
3. Warranty card
4.
Certification
If any of these items are damaged or lost, please contact our
company or dealers, we will solve it ASAP.
【
Product Overview
】
The product is an industrial 2.4G wireless single-band AP. Its
model is IAP2300F-2N2-5T-PDP12_36 (2 WIFI IPEX-1
generation antenna pe 4 100M LAN + 1 100M WAN +
1 12~36VDC power supply).
【
Panel Design
】
Front View
Rear View
Right view
Top view
1.
100M WAN port
2.
100M LAN port
3.
System running indicator RUN
4.
Power supply indicator PWR
5.
2.4G wireless indicator WIFI
6.
Signal strength indicator Bridge
7.
Reset button
8.
Power supply input terminal block
9.
WIFI IPEX-1 generation antenna pedestal
【
Mounting Dimension
】
Unit: mm
Notice before mounting:
Don't place or install the device in area near water or
moist, keep the relative humidity of the device
surrounding between 5%~95% without condensation.
Before power on, first confirm the supported power
supply specification to avoid over-voltage damaging the
device.
The device surface temperature is high after running;
please don't directly contact to avoid scalding.
【
Power Supply Connection
】
The device provides 1 DC power input, interface
is 3-pin 5.08mm pitch terminal blocks, power
supply supports anti-reverse connection and
1.5kV isolation protection. Voltage range: 24VDC
(12~36VDC). Its pin definitions are as follows:
PIN
1
2
3
Definition
V+
FG
V-
Notice: