3M SCOTT PAK-ALERT Скачать руководство пользователя страница 1

Страница: 1 / 24

Page 1 of 24

P/N 595370-01 Rev B 07/19

THE 3M™ SCOTT™ PAK-ALERT DISTRESS ALARM

Including the Optional 3M SCOTT PAK-TRACKER LOCATOR SYSTEM

Integrated with the 3M SCOTT AIR-PAK™

X3 PRO SCBA

FIGURE 1

3M SCOTT PAK-ALERT EQUIPPED WITH THE PAK-TRACKER LOCATOR SYSTEM INSTALLED ON

A 3M SCOTT AIR-PAK X3 PRO SCBA

SENSOR MODULE

ASSEMBLY

WITH PAK-TRACKER

LOCATOR SYSTEM

(RED LABELS)

OPTIONAL PAK-TRACKER

HAND HELD RECEIVER

OPERATION AND MAINTENANCE INSTRUCTIONS

WARNING

THE 3M SCOTT PAK-ALERT DISTRESS ALARM WITH THE PAK-TRACKER LOCATOR SYSTEM IS INTENDED

FOR USE WITH 3M SCOTT SELF-CONTAINED BREATHING APPARATUS (SCBA), WHICH MAY SUPPORT HUMAN

LIFE IN HAZARDOUS ATMOSPHERES. FAILURE TO CAREFULLY READ AND UNDERSTAND THE FOLLOWING

INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR DEATH TO THE SCBA USER.
USE OF AN SCBA EQUIPPED WITH A 3M SCOTT PAK-ALERT DISTRESS ALARM WITH THE 3M SCOTT PAK-

TRACKER LOCATOR SYSTEM WILL REQUIRE MODIFICATION OF THE REGULAR OPERATIONAL INSPECTION

PROCEDURES FOR THE SCBA AND WILL REQUIRE TRAINING OF THE SCBA USER IN THE USE OF PASS-

EQUIPPED SCBAS.
THE FOLLOWING INSTRUCTIONS SUPPLEMENT BUT DO NOT REPLACE THE OPERATING AND MAINTENANCE

INSTRUCTIONS SUPPLIED WITH EACH SCBA.

NOTICE:

THESE USER INSTRUCTIONS ARE TO BE REMOVED

ONLY BY THE END USER.

Содержание SCOTT PAK-ALERT

























Результаты поиска

Содержание SCOTT PAK-ALERT

Отзывы:

Похожие инструкции для SCOTT PAK-ALERT

Бренды по названию

Популярные бренды

3M SCOTT PAK-ALERT, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание SCOTT PAK-ALERT

Отзывы:

Похожие инструкции для SCOTT PAK-ALERT

Бренды по названию

Популярные бренды