3M Ranger 145, Руководство оператора

Страница: 10 / 24

6 Introduction
An equipotentiality plug (grounded) conductor other than a protective earth conductor or a neutral
conductor, providing a direct connection between electrical equipment and the potential equalization
busbar of the electrical installation. Please consult IEC 60601-1; 2005 for requirements.
CAUTION: Recycle to avoid environmental contamination
This product contains recyclable parts. For information on recycling - please contact your nearest 3M
Service Center for advice.
Fuse
Explanation of signal word consequences
WARNING:
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION:
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE:
Indicates a situation which, if not avoided, could result in property damage only.
WARNINGS:
1. To prevent tipping or device damage, the Ranger pressure infusor Model 145 has been designed to only be mounted on a Model
90068/90124 pressure infusor I.V. pole/base.
2. Never infuse fluids if air bubbles are present in the fluid line, as air embolism may result.
3. To reduce the risks associated with hazardous voltage and fire:
• keep power cord visible and accessible at all times. The plug on the power cord serves as the disconnect device. The wall
socket outlet shall be as close as practical and shall be easily accessible.
• use only the power cord specified for this product and certified for the country of use.
• do not allow the power cord to get wet.
• do not use the pressure infusor when it appears the pressure infusor, power cord or any component is damaged. Contact
3M Health Care technical support at 1-800-228-3957.
• this equipment must only be connected to a supply mains with protective earth.
4. To reduce the risks associated with exposure to biohazards always perform the decontamination procedure prior to returning
the pressure infusor for service and prior to disposal.
5. To prevent injury, do not use the power cord to transport or move the device.
6. To prevent injury, ensure the power cord is free from the castors during transport of the device.