15
Table 1 - Maintenance Check Sheet
Component:
Date of First Use:
Date of Purchase:
The System
Inspection:
Every Year/
After a Fall
Yes /No
Visual inspection. Check system for signs of a fall
event.
X
Check system tag is present and legible
X
Check all components for signs of damage, rusting
or severe corrosion
X
Check integrity of structure
X
Check split pins present and in good condition
X
Check fasteners are correctly tightened. Use Torque
Wrench as required
X
Clean system as necessary
X
Check cable condition for fretting, corrosion, signs of
contamination and damage
X
Check cable tension
X
Inspect brackets for damage, corrosion, or rust.
Look for cracks, bends, or wear that could affect
strength or operation of the system.
X
Check inline energy absorbing elements are intact
X
Check intermediate brackets
X
Check clamps are not overtightened.
X
Cabloc/Cabloc
Pro Sleeve
Check that the spring is functioning by lifting the
cam arms and letting go, the cam arms should
spring back.
X
Check the rivet and rivet nuts for signs of damage
X
Check the gate of the karabiner opens, closes and
locks
X
Check for cuts, abrasions and fraying
X
Check that there is no visible damage to the integral
energy absorber and the connection between the
integral energy absorber and karabiner.
X
;
Extreme working conditions (harsh environment, prolonged use, etc.) may require increasing the frequency of inspections.
DO NOT USE THE SYSTEM IF ANY DOUBTS REMAIN AFTER PRE USE CHECKS HAVE BEEN CONDUCTED.
Periodic Examination And Repair History
Date
Reason for entry
(Periodic examination
or repair)
Defects noted repairs
carried out and other
relevant information
Name and signature
of competent person
Periodic examination
next due date
