EN
(English)
1
I.
INTENDED USE
The 3M
™
Clean-Trace
™
Luminometer is a battery operated Luminometer utilized primarily for objective and sensitive
determination of the end result of Adenosine Tri-Phosphate (ATP) tests. The 3M Clean-Trace Luminometer power
supply is provided to charge the battery. The 3M™ Cle
an-
Trace™ Hygiene Management Software is designed for the
transfer, organization, and storage of data generated from the 3M™ Clean
-
Trace™ ATP Tests.
3M has not designed nor documented the 3M Clean-Trace Luminometer, power supply, or 3M Clean-Trace Hygiene
Management Software for use with other manufacturers’ products
. Using
with other manufacturers’ designs, or in any
other application that has not been evaluated or documented by 3M and may lead to unsafe conditions. The 3M
Clean-Trace Luminometer is not intended to be used in potentially flammable or explosive environments. Although
the 3M Clean-Trace Hygiene Monitoring and Management System is very sensitive, surfaces or solutions should not be
considered sterile based on results. The 3M Clean-Trace Hygiene Monitoring and Management System is not intended
to be used in the diagnosis of conditions in humans or animals. The user is responsible to know and follow applicable
workplace regulations.
3M anticipates that the 3M Clean-Trace ATP Tests, equipment, and software will be utilized by technicians that have
been properly trained on the 3M Clean-Trace ATP Test methods.
If this product is used in a manner not specified, the protection provided by the product may be impaired.
II.
USER RESPONSIBILITY
Users are responsible for familiarizing themselves with product instructions and information. Visit our website at
www.3M.com/foodsafety, or contact your local 3M representative or distributor for more information.
When selecting a test method, it is important to recognize that external factors such as sampling methods, testing
protocols, sample preparation, handling, and laboratory technique may influence results.
It is the user’s responsibility in selecting any test method or product to evaluate a suffi
cient number of samples with
the appropriate matrices and microbial challenges to satisfy the user that the chosen test method meets the user’s
criteria.
It is also
the user’s responsibility to determine that any test methods and results meet its customers’ and suppliers’
requirements.
As with any test method, results obtained from use of any 3M Food Safety product do not constitute a guarantee of
the quality of the matrices or processes tested.
Explanation of Safety Related Symbols
Attention: Read Accompanying Documentation
CAUTION: Recycle 3M Clean-Trace Luminometer to avoid
environmental contamination. This product contains recyclable parts. For
information on recycling, please contact your nearest 3M Service Center
for advice.
WEEE mark - This product contains electrical and electronic components
and must not be disposed of using standard refuse collection. Please
consult local directives for disposal of electrical and electronic
equipment.
UL NRTL mark (US and Canada electrical safety)
CE mark (conforms to applicable requirements for European
Economic Area).
RCM mark (Australia electrical safety and EMC)
The 3M Clean-Trace Luminometer model number, which is LM1.
The 3M Clean-Trace Luminometer serial number
