27
EN
(English)
f.
Resetting the 3M
™
Clean-Trace
™
Luminometer
This functionality enables the ability to clear Test results from the 3M Clean-Trace LM1 Luminometer, as well as set
it back to factory default. Additional details on 3M Clean-Trace Luminometer reset functionality is available in the
3M Clean-Trace Software User Manual/Supplement.
To reset the 3M Clean-Trace Luminometer:
▪
Get to the Settings screen.
▪
In the Settings screen, tap
[Reset].
▪
In the Reset menu, tap the option that best suits your need:
o
[Delete all results]
to clear all Test results from the device.
o
[Reset to default settings]
to clear all user information from
the device, including Locations, Users, Sample plans, Test points
and Test results.
Note:
▪
The Default user will have access/permission to “
Reset
”
only if the 3M Clean-Trace Luminometer has not yet been
synchronized to a 3M Clean-Trace Desktop Software, therefore not assigned to any location.
▪
Access or permission to “
Reset
” will be controlled from the 3M Clean
-Trace Desktop software, for 3M Clean-Trace
Luminometer that has been synchronized to a 3M Clean-Trace Desktop Software, therefore assigned to a location.
g.
Looking up Calibration date and device software details
The 3M Clean-Trace Luminometer calibration date and software details including version numbers are in the
“
About
”
screen.
▪
Get to the Settings screen
.
▪
In the Settings screen, tap
[About]
. The About screen will appear, displaying:
o
Software versions.
o
Firmware version.
o
Operating System version.
o
The device serial number.
o
Calibration date and other software details.
▪
Tap
[Continue]
to return.
