Fibrlok
™
II Splice/Holder 2539 Instructions
Use 99% pure reagent-grade isopropyl alcohol to clean the fibers and other components. When splicing
any cable containing grease, ensure that all grease is wiped away and the buffer coating and fiber are
thoroughly cleaned with isopropyl alcohol.
The 3M™ Fibrlok™ II Splice/ Holder 2539 enables fast, on-site installation of Fiber-to-the Premises
(FTTP) connections with a built-in actuation feature. 3M Fibrlok II Universal Optical Splices provide
permanent mechanical splices using either single-mode or multimode 125
μ
m fibers with any combination
of 250
μ
m and 900
μ
m coating diameters.
1.0 General
1.1
2.0 Safety and Helpful Hints
Note: Carefully follow safety, health and environmental information on the label or MSDS for isopropyl
alcohol. Storage, use and disposal of isopropyl alcohol per your company health, safety and environmental
instructions.
Carefully follow safety, health and environmental information on 3M Fibrlok II Splice label or
Material Safety Data Sheet.
The gel inside the splice may cause minimal eye irritation. Avoid eye contact. Wash hands before eating or
smoking. Immediately flush eyes with plenty of water while holding eyelids open. Do not view fiber ends if
they are illuminated with a laser.
2.2
2.1
1.2 All 2529 universal optical fiber splices are gray in color
and are marked with 3M Fibrlok II logo on the splice cap.
