3M CP45B, Руководство пользователя

Страница: 25 / 28

19
English
If your Camcorder Projector does not seem to be functioning properly, check the items below
before you contact an authorized service center.
Symptom Check Point
The Camcorder Projector
can’t be turned on.
• Ensure the battery is fully charged or the AC power adapter
is properly connected.
The projected image is
too dark.
• Use the Camcorder Projector in a darker environment.
• Project the image on a flat, white surface.
•
Decrease the size of projected image.
The projected image is
blurry.
• Adjust the focus. Please refer to “Adjusting the Focus”
section.
• Check if the lens is dirty.
• Replace with an image of higher resolution.
The image is not played.
• Ensure the image format is compatible.
• Replace with another file or memory card.
• Convert the file with the attached AMC software.
No image is projected
when an AV device is
connected.
• Ensure the connected device is equipped with AV-out
function.
• Check if the AV Cable is connected, and the Camcorder
Projector is switched to AV-in function.
• Check if the AV Cable is plugged in correctly.
The surface temperature
of the Camcorder
Projector feels warm.
It is normal for this Camcorder Projector to generate
moderate heat during normal operation.
Troubleshooting