1-1
SECTION 1: BEFORE INSTALLATION
Inspecting And Handling Your Filter:
Inspect the equipment for shipping damage. If damaged, notify the transportation company and request a damage inspection.
Handle the system with care. Damage can occur if dropped or set on sharp, uneven projections on the fl oor. Do not turn the system upside down.
Make Sure Your Water Has Been Thoroughly Tested:
An analysis of your water should be made prior to the selection of your water conditioning equipment. Your dealer will generally perform this service for you,
and may send a sample to the factory for analysis and recommendations. Enter your below for a permanent record.
IMPORTANT NOTE:
IMPORTANT NOTE:
Hydrogen sulfi de (H
2
S) must be tested for at the well site. For accuracy, the sample must be drawn with the pump RUNNING and the test be completed
within ONE minute after the sample is drawn.
Analysis Of Your Water
Hardness _____gpg
Iron (Fe)
_____gpg
Manganese (Mn)
_____ppm
pH _____
Tannins (Humic Acid)
_____ppm
Hydrogen Sulfi de (H
2
S)
_____ppm
Other_______________
_____
Other_______________
_____
There are several different fi lter media which can be used in this fi lter. Each is designed to improve a particular aesthetic problem. NONE OF THEM SHOULD
BE USED TO MAKE NON-POTABLE WATER SAFE TO DRINK. The following descriptions indicate not only what the media is designed to do, but also points out
their limitations.
TABLE OF CONTENTS
SECTION
DESCRIPTION
1
BEFORE INSTALLATION
2
INSTALLATION
3
MAINTENANCE
4
TROUBLESHOOTING
5
SPECIFICATIONS AND OPERATING DATA
6
COMPONENTS PARTS LIST
7
LIMITED WARRANTY
