3M 1
1
/
4
in. Mini Orbital
1
Revision 053008
Intended Use
MINI RANDOM ORBITAL SANDER MANUAL
8,000 RPM 1
1
/
4
in (32 mm)
Important Safety Information
Please read, understand and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
This product is intended for use in industrial locations, and used only by skilled, trained professionals in accordance with the instructions
in this manual. This pneumatic tool is designed to be used with a backup pad and appropriate abrasive for sanding small defects in
metals, wood, stone, plastics and other materials. It should only be used for such sanding applications and within its marked capacity
and ratings. Only accessories specifically recommended by 3M should be used with this tool. Use in any other manner or with other
accessories could lead to unsafe operating conditions.
Damp application using water or water-solvent mixture is acceptable, but only when care is exercised to avoid injury due to splashing of
liquid. Also, careful cleaning of tool is necessary following each use of product in damp application.
Do not use back-up pads that have a Max RPM or Max OPM less than 8,000. Never use back-up pads that have a weight and/or size
different than what the tool was specifically designed for.
To reduce the risk of all hazards associated with this product:
• Read, understand and follow the safety information contained in these instructions prior to the use of this tool.
• Only personnel who are properly trained should be allowed to service this tool.
• Always wear protection for eyes, ears and respiratory protection while operating this product. Follow ANSI Z87.1 or
local/national standards for eyewear and other personal protective equipment requirements.
• Practice safety requirements. Work alert, wear proper attire; never operate tools under the influence of alcohol or drugs or in a
manner inconsistent with its intended use.
To reduce the risks associated with accessory rupture or disintegration:
• Never exceed marked maximum input pressure (90psi / .62Mpa / 6.2Bars).
• Use care in attaching back-up pad; follow the instructions to ensure that it is securely attached to the tool before use.
• Never free spin the tool or otherwise allow it to be started unintentionally; particularly during damp application.
• Never point this product in the direction of yourself or another person.
To reduce the risk associated with loud noise:
• Immediately discontinue use of product if its noise reduction muffler system has been damaged or is otherwise not functioning
properly. Have product repaired before placing back into use.
To reduce the risk associated with vibration emissions during use of product:
• If any physical hand/wrist discomfort is experienced, stop work promptly and seek medical attention. Hand, wrist and arm injury
may result from repetitive work, motion and overexposure to vibration.
WARNING
Explanation of Signal Word Consequences
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury
and/or property damage.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury and/or property damage.
WARNING:
CAUTION:
