Ver 1.0.0.0
8
5. Once the device has rebooted properly, you can check if the switch is online by
clicking on the
STATUS
. The information should be displayed under the
WAN
section.
Restore Factory Default Settings
G2wifi II provides a “Reset” button that will be easy for users to reset the router to default. The
button is located at the rear panel of the router (See the figure below). Reset steps are as
follows:
(1) Unplug the power cable.
(2) Press
the
RESET
button and keep it pressed.
(3) Plug in the power cable and release the
RESET
button after
10 seconds around.
(4) Procedures of the reset will be completed while all LEDs on
the front panel return into the normal status.
RESET Button
